Filter Results By:

Products

Applications

Manufacturers

Showing results: 121 - 135 of 183 items found.

  • Human Machine Interface

    Curtiss-Wright Defense Solutions

    ENSCO Avionics' Human Machine Interface (HMI) Solution is pre-tested and pre-validated support for ENSCO Avionics' IData graphical software solution on Curtiss-Wright's rugged COTS modules. This solution significantly reduces the risk and costs associated with adding HMI capabilities into embedded systems by allowing system designers to quickly integrate our rugged COTS graphics controllers and single board computers (SBCs) with IData.

  • Portable Logic Analyzer & Digital Pattern Generator

    Digital Discovery - Digilent Inc.

    The Digital Discovery is designed to be the ultimate embedded development companion. Configured and controlled by the full featured WaveForms 2015 software toolset, the Digital Discovery provides a Logic Analyzer, Pattern Generator, Digital IO, Protocol Analyzer and Script Editor. Equipped with a Xilinx Spartan 6 FPGA, the Digital Discovery can provide up to 32 channels and up to 800MSPS. Thats 8 times the sample rate of the Analog Discovery!

  • NI Vehicle Radar Test System

    NI

    VRTS provides automated radar measurement and obstacle simulation capabilities for 76 to 81 GHz automotive radar systems. With VRTS, you can perform precision RF measurements and simulate a wide range of test scenarios for radar hardware and software subsystems, including sensors, advanced driver assistance systems (ADAS), and embedded software. Use VRTS for all phases, from design to manufacturing, of ADAS and radar system test.

  • Test Automation System

    RT-Tester - Verified Systems International GMBH

    Designed to perform automated hardware-in-the-loop tests and software component test on process or thread level for embedded real-time systems. The functional components of RT-Tester can be structured as shown in the figure to the left. Please click on the small image to enlarge the picture. The System Under Test (SUT) denotes the object to be tested.

  • Super Fast Stand-Alone ISP Programmer

    848Pro2 - Dataman, Inc

    The Dataman 848Pro2 is a super fast stand-alone gang programmer with eight independent 48-pin ZIF sockets, ISP capabilities and internal control PC driven by Windows Embedded 8.1 Industry Pro • Stand-alone operation with touch screen control • Internal control PC driven by Windows Embedded 8.1 Industry Pro • Up to 75% faster programming of high-capacity memory devices • Over 105,000 devices supported with new devices added monthly • Independent modules supporting concurrent programming • Intelligent pin drivers operate down to 1.8V so you'll be ready to program the full range of advanced low-voltage devices • Full ISP capabilities including JTAG compatibility • Comprehensive 3 years parts and labor warranty • Free life-time software updates

  • Datalogger

    OBDII - Danlaw, Inc.

    Automotive standards are demanding. For more than three decades, we’ve engineered, manufactured, and tested embedded software, electronics, and vehicle network communications for the world’s largest automotive manufacturers and suppliers. We’ve designed and built DataLogger to exceed these standards. We’ve tested it thoroughly with billions of miles of vehicle data collected from one of the largest cross-sections of vehicles in the world. So when we say you’re getting the best device on the market, you can hold us to that.

  • Industrial PC

    Omron Industrial Automation

    Hybrid controller which combines Sysmac machine control and IT technology*Intel Core i7 Quad-core processor*Windows Embedded Standard 7 64-bit*Open operating system allows running customised software and hardware*Built-in EtherNet/IP port for your IT systems and machine to machine communication*Sysmac machine controller inside*500 μs system cycle time*Up to 64 synchronized axes*Built-in EtherCAT port for up to 192 synchronized slaves

  • Software Debug and Trace Products

    SourcePoint ARM - ASSET InterTech, Inc.

    Today's systems require high octane code to unleash the power of the system. Thus right tools for debug are essential. They must be context aware. Whether working on bare metal systems, as embedded developers often do or working on UEFI base platforms with the complexity of the firmware now rivaling some operating systems. The tools must provide a view into the hardware/software interaction to isolate that illusive bug. SourcePoint hardware assisted debugger has just what is needed for the toolbox of the software developer.

  • Software

    B&W Tek, Inc.

    We offer a full suite of software for spectroscopic data collection and analysis designed for users at all levels, and varying applications. Our standard BWSpec® spectral data acquisition software allows for easy collection of data from our Raman systems and modular spectrometers. It includes tools for instrument control for data collection and spectral manipulation. The raw data and corrected data are stored and can be easily viewed. Data manipulation tools include smoothing, baseline correction and derivatives. Data can be saved in different formats for use in additional application software. For spectral identification against Raman spectral libraries with a simple interface for immediate identification for verification with a pass/fail result, our BWID® software provides qualitative analysis. Users of BWID software can create their own Raman spectral libraries, or select from our numerous ready to use libraries. For identification with portable Raman in regulated environments, the US FDA 21 CFR part 11- complaint version of BWID can be used. B&W Tek’s unique see-through identification using the STRam® can also be done using the BWID software operating on the embedded tablet computer of the STRam system. For quantitative analysis, data collected with BWSpec or other packages can be imported into the BWIQ® multivariate data analysis software, offering a full suite of data preprocessing, regression and classification analysis algorithms. PLS regression models from the BWIQ software an be used in rel-time in our BWAnalyst software, for use with the QTRam , as well as in Metrohm’s Vision® software. The i-Raman series portable Raman instruments can also be operated for single acquisition, or for real-time analysis in the Routine Analysis mode of the Vision software.

  • CompactDAQ Controller

    NI

    The CompactDAQ Controller is a rugged, reliable, high-performance embedded controller with industry-standard certifications. It is ideal for performing waveform acquisition and inline software analysis while logging data to onboard or removable SD memory. C Series modules deliver high-accuracy I/O with measurement-specific signal conditioning to connect to any sensor type. The controller also offers a wide array of standard connectivity and expansion options, such as USB, Ethernet, CAN/LIN, and RS232 serial. It runs either the NI Linux Real-Time OS or Windows Embedded Standard 7. You can customize and deploy your measurement application with support for multiple programming languages, including LabVIEW, which contains over 950 signal processing and analysis functions to accelerate development. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.

  • Engineering

    Lynred USA

    As a pioneer in infrared imaging solutions, our engineers have an unsurpassed level of proficiency in prototype design, customization and system integration. Our expertise is multifaceted ranging from advanced infrared sensor signal processing, calibration techniques, radiometry, optics, embedded software development, PC application software development, industrial and mechanical design and production tooling. Our goal is your successful project; one that utilizes the correct components and is completed on time and within budget. This is accomplished through our Concept to Solution approach which allows for the use of technically advanced components, group collaboration, quick responses and final products tested to spec. Whatever level of integration you choose and support you need, know our engineering team is there to assist.

  • Gaming Platform Solutions

    Advantech Co. Ltd.

    Advantech-Innocore is dedicated to providing advanced gaming solutions for customers, including gaming platforms, gaming software, gaming monitors, game boards, game engines and peripherals for customers. Advantech-Innocore offers the widest range of industrial computer products for gaming solutions, such as industrial gaming motherboards, single board computers and embedded platform DPX series, designed specifically for the gaming industry. We also provide our customers with excellent standard/customized products and services, employing up-to-date technology for gaming platforms to meet the needs for Casino Machines, AWPs, VLT, Multiplayer Games, Arcade Games, and Pachislots. Advantech-Innocore is an industry leader and brings innovative gaming solutions. A full range of products are offered, including gaming platforms and motherboards, gaming monitors as well as gaming software.

  • STANAG3910 Electrica lTest And Simulation Modulefor Standard Ethernet

    ANET3910-EN - AIM GmbH

    STANAG3910 Electrical Test and Simulation module for Standard Ethernet. The ANET embedded Linux operating system gives the unique capability to run the optional PBA.pro Engine right in the box.Another option is the ANET-ADK onboard software development kit where users create run-time applications to execute right in the box. For wireless applications, an ANET compatible USB Wifi dongle is optionally available. The capability to execute Python scripts in the ANET is a standard feature. For applications with multiple ANET devices AIM offers the ADock ANET Docking Station to host up to 4 ANET modules.

  • High-Performance Intelligent Pod for Corelis Boundary-Scan Controllers

    ScanTAP 4 & 8 - Corelis, Inc.

    Boundary-scan has proven itself time and again to be a truly versatile interface for structural test, embedded functional test, built-in self-test (BIST), software debug, and in-system programming. Supporting such diverse applications requires equipment with high-performance specifications and extended features.Corelis ScanTAP pods are designed for use with PCI-1149.1/Turbo and PCIe-1149.1 high-speed JTAG controllers. Featuring 4 & 8 independent Test Access Ports (TAPs), up to 80 MHz clock rates, and advanced TAP capabilities such as analog voltage measurement, the ScanTAP family of intelligent pods is the ideal JTAG interface for high-performance environments.

  • FLIM Upgrades for Nikon

    A1 / C1 / C2 - Becker & Hickl GmbH

    *bh FLIM Embedded in Nikon NIS-Elements Software*Two Fully Parallel TCSPC FLIM Channels*Compact bh Simple-Tau or Power-Tau System*Two HPM-100-40 GaAsP Hybrid Detectors*Excitation by bh ps Diode Lasers*Excellent Time Resolution: Electrical IRF Width 6.5 ps FWHM*Excellent Timing Stability*Time Channel Width Down to 813 fs*Megapixel FLIM, Up to 2048 x 2048 Pixels at 256 Time Channels*Detection Wavelength Range from 360 nm to 700 nm

Get Help